The daily maintenance of an automatic dispensing machine includes the following key operations:

Cleaning nozzles and pipelines:After work every day, remove any adhesive residue from the nozzle and pipes to prevent blockages that may affect the dispensing accuracy. Alcohol or solvents can be used for wiping.

Transmission mechanism inspection:Daily checkX、Y、ZThe tightening of screws on the axis track and amplitude modulation mechanism ensures smooth transmission without looseness.?
Lubrication maintenance:Regularly clean the screw and slide rail, and apply lubricating oil to reduce the risk of rust and wear.

Air pressure monitoring:Ensure sufficient and stable air pressure to avoid process problems caused by uneven glue spraying.

Seal maintenance:Check the wear or deformation of the seals according to the frequency of use (such as every three months for mild use and every month for severe use), and replace them in a timely manner to ensure sealing performance.

Environmental management:Keep the operating environment of the equipment clean to prevent dust and impurities from entering the installation site and damaging components.

Adhesive replacement treatment:Thoroughly clean the pipeline when changing the type of adhesive to avoid malfunctions caused by mixing different adhesives.

Observation of operating parameters:Monitor the pressure and temperature of the dispensing machine to ensure that it is within the tolerance range of the seals and components.

Valve body maintenance(For injection valve models): Clean the inside of the valve body and observe the leakage hole for each work shift; every7Perform a thorough maintenance process for the day.